Installation Guide

Universal Mounting System

Tsukayu mounting brackets are made of very strong, thick, quality stainless steel. Install your hardbags wherever you want them to be.

Installation Steps

1. Start from belt guard side. Bolt brackets on with supplied spacers, leave adjustable.
2. Put painters tape on area to be drilled. Coat bracket tops with paint.
3. Position bag and press against brackets to transfer paint marks.
4. Drill with 5/16 bit on marks, then 3/8th bit for bottom 2 holes.
5. Test fit the bag. Check clearances. Remove bags WITH brackets attached.
6. Use assembled side to transfer holes to other bag.
7. Install bags with fender washers. Tighten all bolts. Check with full load before riding.